Publications

Mechanism of the Bauschinger effect in Al-Ge-Si alloys

Gan, Wei; Bong, Hyuk J.; Lim, Hojun L.; Boger, R.K.; Barlat, F.; Wagoner, R.H.

Wrought Al-Ge-Si alloys were designed and produced to ensure dislocation bypass strengthening (“hard pin” precipitates) without significant precipitate cutting/shearing (“soft pin” precipitates). These unusual alloys were processed from the melt, solution heat treated and aged. Aging curves at temperatures of 120, 160, 200 and 240 °C were established and the corresponding precipitate spacings, sizes, and morphologies were measured using TEM. The role of non-shearable precipitates in determining the magnitude of Bauschinger was revealed using large-strain compression/tension tests. The effect of precipitates on the Bauschinger response was stronger than that of grain boundaries, even for these dilute alloys. The Bauschinger effect increases dramatically from the under-aged to the peak aged condition and remains constant or decreases slowly through over-aging. This is consistent with reported behavior for Al-Cu alloys (maximum effect at peak aging) and for other Al alloys (increasing through over-aging) such as Al-Cu-Li, Al 6111, Al 2524, and Al 6013. The Al-Ge-Si alloy response was simulated with three microstructural models, including a novel SD (SuperDislocation) model, to reveal the origins of the Bauschinger effect in dilute precipitation-hardened / bypass alloys. The dominant mechanism is related to the elastic interaction of polarized dislocation arrays (generalized pile-up or bow-out model) at precipitate obstacles. Such effects are ignored in continuum and crystal plasticity models.