Publications
Measurements of the initial transient of a dense particle curtain following shock wave impingement
Experiments were performed within Sandia National Labs’ Multiphase Shock Tube to measure and quantify the transient behavior of a dense particle curtain, following interaction with a planar shock wave. The data obtained are in the form of two particle diameter ranges (dp= 106-125, 300-355 µm) across Mach numbers ranging from 1.24-2.02. Using these data, along with data compiled from literature, the dispersion of a dense curtain was studied for multiple Mach numbers, particle sizes, and volume fractions. High-speed Schlieren imaging at 75 kHz was used to track the upstream and downstream edges of the curtains over time. Non-dimensionalization of the data was then carried out according to two different scaling methods found within the literature, with time scales defined based on either particle time of flight or pressure ratio across a reflected shock. The data show that spreading of the particle curtain is a function of the volume fraction, with the effectiveness of each timescale based on the proximity of a given curtain’s volume fraction to the dilute mixture regime. A new scaling argument is defined here, based on a simplified force balance, which shows improved collapse of the curtain spreading data across the volume fractions presented. It is seen that volume fraction corrections applied to a traditional time of flight timescale result in the best collapse of the data between the two timescales tested here.