Publications

Life assessment of full-scale EDS vessel under impulsive loadings

Yip, Mien Y.; Haroldsen, Brent L.

The Explosive Destruction System (EDS) was developed by Sandia National Laboratories for the US Army Product Manager for Non-Stockpile Chemical Materiel (PMNSCM) to destroy recovered, explosively configured, chemical munitions. PMNSCM currently has five EDS units that have processed over 1,400 items. The system uses linear and conical shaped charges to open munitions and attack the burster followed by chemical treatment of the agent. The main component of the EDS is a stainless steel, cylindrical vessel, which contains the explosion and the subsequent chemical treatment. Extensive modeling and testing have been used to design and qualify the vessel for different applications and conditions. The high explosive (HE) pressure histories and subsequent vessel response (strain histories) are modeled using the analysis codes CTH and LS-DYNA, respectively. Using the model results, a load rating for the EDS is determined based on design guidance provided in the ASME Code, Sect. VIII, Div. 3, Code Case No. 2564. One of the goals is to assess and understand the vessel's capacity in containing a wide variety of detonation sequences at various load levels. Of particular interest are to know the total number of detonation events at the rated load that can be processed inside each vessel, and a maximum load (such as that arising from an upset condition) that can be contained without causing catastrophic failure of the vessel. This paper will discuss application of Code Case 2564 to the stainless steel EDS vessels, including a fatigue analysis using a J-R curve, vessel response to extreme upset loads, and the effects of strain hardening from successive events. Copyright © 2010 by ASME.