Publications
Kinetic simulation of a low-pressure helium discharge with comparison to experimental measurements
Modern computational validation efforts rely on comparison of known experimental quantities such as current, voltage, particle densities, and other plasma properties with the same values determined through simulation. A discrete photon approach for radiation transport was recently incorporated into a particle-in-cell/direct simulation Monte Carlo code. As a result, spatially and temporally resolved synthetic spectra may be generated even for non-equilibrium plasmas. The generation of this synthetic spectra lends itself to potentially new validation opportunities. In this work, initial comparisons of synthetic spectra are made with experimentally gathered optical emission spectroscopy. A custom test apparatus was constructed that contains a 0.5 cm gap distance parallel plane discharge in ultra high purity helium gas (99.9999%) at a pressure of 75 Torr. Plasma generation is initiated with the application of a fast rise-time, 100 ns full-width half maximum, 2.0 kV voltage pulse. Transient electrical diagnostics are captured along with time-resolved emission spectra. A one-dimensional simulation is run under the same conditions and compared against the experiment to determine if sufficient physics are included to model the discharge. To sync the current measurements from experiment and simulation, significant effort was undertaken to understand the kinetic scheme required to reproduce the observed features. Additionally, the role of the helium molecule excimer emission and atomic helium resonance emission on photocurrent from the cathode are studied to understand which effect dominates photo-feedback processes. Results indicate that during discharge development, atomic helium resonance emission dominates the photo-flux at the cathode even though it is strongly self-absorbed. A comparison between the experiment and simulation demonstrates that the simulation reproduces observed features in the experimental discharge current waveform. Furthermore, the synthesized spectra from the kinetic method produces more favorable agreement with the experimental data than a simple local thermodynamic equilibrium calculation and is a first step towards using spectra generated from a kinetic method in validation procedures. The results of this study produced a detailed compilation of important helium plasma chemistry reactions for simulating transient helium plasma discharges.