Publications
Ion beam characterization of advanced luminescent materials for application in radiation effects microscopy
The ion photon emission microscope (IPEM) is a technique developed at Sandia National Laboratories (SNL) to study radiation effects in integrated circuits with high energy, heavy ions, such as those produced by the 88" cyclotron at Lawrence Berkeley National Laboratory (LBNL). In this method, an ion-luminescent film is used to produce photons from the point of ion impact. The photons emitted due to an ion impact are imaged on a position-sensitive detector to determine the location of a single event effect (SEE). Due to stringent resolution, intensity, wavelength, decay time, and radiation tolerance demands, an engineered material with very specific properties is required to act as the luminescent film. The requirements for this material are extensive. It must produce a high enough induced luminescent intensity so at least one photon is detected per ion hit. The emission wavelength must match the sensitivity of the detector used, and the luminescent decay time must be short enough to limit accidental coincidences. In addition, the material must be easy to handle and its luminescent properties must be tolerant to radiation damage. Materials studied for this application include plastic scintillators, GaN and GaN/InGaN quantum well structures, and lanthanide-activated ceramic phosphors. Results from characterization studies on these materials will be presented; including photoluminescence, cathodoluminescence, ion beam induced luminescence, luminescent decay times, and radiation damage. Results indicate that the ceramic phosphors are currently proving to be the ideal material for IPEM investigations.