Publications

Inductively coupled BCl₃/Cl₂ /Ar plasma etching of Al-rich AlGaN

Douglas, Erica A.; Sanchez, Carlos A.; Kaplar, Robert K.; Allerman, A.A.; Baca, A.G.

Varying atomic ratios in compound semiconductors is well known to have large effects on the etching properties of the material. The use of thin device barrier layers, down to 25 nm, adds to the fabrication complexity by requiring precise control over etch rates and surface morphology. The effects of bias power and gas ratio of BCl₃ to Cl₂ for inductively coupled plasma etching of high Al content AlGaN were contrasted with AlN in this study for etch rate, selectivity, and surface morphology. Etch rates were greatly affected by both bias power and gas chemistry. Here we detail the effects of small variations in Al composition for AlGaN and show substantial changes in etch rate with regards to bias power as compared to AlN.