Publications
Identifying the modal properties of nonlinear structures using measured free response time histories from a scanning laser Doppler vibrometer
This paper explores methods that can be used to characterize weakly nonlinear systems, whose natural frequencies and damping ratios change with response amplitude. The focus is on high order systems that may have several modes although each with a distinct natural frequency. Interactions between modes are not addressed. This type of analysis may be appropriate, for example, for structural dynamic systems that exhibit damping that depends on the response amplitude due to friction in bolted joints. This causes the free-response of the system to seem to have damping ratios (and to a lesser extent natural frequencies) that change slowly with time. Several techniques have been proposed to characterize such systems. This work compares a few available methods, focusing on their applicability to real measurements from multi-degree-of- freedom systems. A beam with several small links connected by simple bolted joints was used to evaluate the available methods. The system was excited by impulse and the velocity response was measured with a scanning laser Doppler vibrometer. Several state of the art procedures were then used to process the nonlinear free responses and their features were compared. First the Zeroed Early Time FFT technique was used to qualitatively evaluate the responses. Then, the Empirical Mode Decomposition method and a simple approach based on band pass filtering were both employed to obtain mono-component signals from the measured responses. Once mono-component signals had been obtained, they were processed with the Hilbert transform approach, with several enhancements made to minimize the effects of noise. © The Society for Experimental Mechanics, Inc. 2012.