Publications

Front end of line integration of high density, electrically isolated, metallized through silicon vias

Bauer, Todd M.; Shinde, Subhash L.; Massad, Jordan M.; Hetherington, Dale L.

We have developed a complete process module for fabricating front end of line (FEOL) through silicon vias (TSVs). In this paper we describe the integration, which relies on using thermally deposited silicon as a sacrificial material to fill the TSV during FEOL processing, followed by its removal and replacement with tungsten after FEOL processing is complete. The uniqueness of this approach follows mainly from forming the TSVs early in the FEOL while still ultimately using metal as the via fill material. TSVs formed early in the FEOL can be formed at comparatively small diameter, high aspect ratio, and high spatial density. We have demonstrated FEOL-integrated TSVs that are 2 μm in diameter, over 45 μm deep, and on 20 μm pitch for a possible interconnect density of 250,000/cm2. Moreover, thermal oxidation of silicon can be used to form the dielectric isolation. Thermal oxidation is conformal and robust in the as-formed state. Finally, TSVs formed in the FEOL alleviate device design constraints common to vias-last integration. © 2009 IEEE.