Publications
Field-structured composite studies
Field-structured composites (FSCs) were produced by hosting micron-sized gold-coated nickel particles in a pre-polymer and allowing the mixture to cure in a magnetic field environment. The feasibility of controlling a composite's electrical conductivity using feedback control applied to the field coils was investigated. It was discovered that conductivity in FSCs is primarily determined by stresses in the polymer host matrix due to cure shrinkage. Thus, in cases where the structuring field was uniform and unidirectional so as to produce chainlike structures in the composite, no electrical conductivity was measured until well after the structuring field was turned off at the gel point. In situations where complex, rotating fields were used to generate complex, three-dimensional structures in a composite, very small, but measurable, conductivity was observed prior to the gel point. Responsive, sensitive prototype chemical sensors were developed based on this technology with initial tests showing very promising results.