Publications
Experimental investigation of a cylinder in turbulent thermal convection with an imposed shear flow
An experimental investigation is made into the fluid mechanics and heat transfer of a circular cylinder immersed in a wall-bounded turbulent mixed-convection flow of water. The cylinder is oriented spanwise to the forced channel flow and within the thermal boundary layer of the heated lower wall. The flow channel is capped with a cold, near-adiabatic upper wall producing a fully turbulent gap Rayleigh number of 10{sup 8}. A low-speed crossflow is applied to advect the turbulent thermal plumes over the cylinder surface. We present spatially resolved cylinder-surface heat-flux data alongside 2-D PIV imaging of the streamwise and wall-normal velocity components for two flow conditions in the mixed-convection heat-transfer regime. The measured cylinder-wake flowfield reflects the complex coupling between the separated wake flow, the highly turbulent freestream and the buoyant wall and cylinder boundary layers. A method for measurement of spatially resolved surface heat fluxes based on the measured cylinder-surface temperature distribution and a well-posed two-dimensional solution to the conduction problem in the cylinder wall is presented. The resulting spatially resolved flux measurements show enhanced surface heat transfer, which results from the intense buoyancy generated free-stream turbulence and mixing in the cylinder wake. This work extends the literature on thermal convection with crossflow well into the turbulent regime and is, to our knowledge, the first investigation of surface heat-transfer to an object of engineering importance placed in this type of turbulent mixed-convection flowfield. The data are currently being utilized for validation of mixed convection turbulence models at Sandia and comparisons between the computational and experimental results are presented.