Publications

Experience with using code case 2564 to design and certify an impulsively loaded vessel

Haroldsen, Brent L.; Stofleth, Jerome H.; Yip, Mien Y.; Caplan, Allan

Code Case 2564 for the design of impulsively loaded vessels was approved in January 2008. In 2010 the US Army Non-Stockpile Chemical Materiel Program, with support from Sandia National Laboratories, procured a vessel per this Code Case for use on the Explosive Destruction System (EDS). The vessel was delivered to the Army in August of 2010 and approved for use by the DoD Explosives Safety Board in 2012. Although others have used the methodology and design limits of the Code Case to analyze vessels, to our knowledge, this was the first vessel to receive an ASME explosive rating with a U3 stamp. This paper discusses lessons learned in the process. Of particular interest were issues related to defining the design basis in the User Design Specification and explosive qualification testing required for regulatory approval. Specifying and testing an impulsively loaded vessel is more complicated than a static pressure vessel because the loads depend on the size, shape, and location of the explosive charges in the vessel and on the kind of explosives used and the point of detonation. Historically the US Department of Defense and Department of Energy have required an explosive test. Currently the Code Case does not address testing requirements, but it would be beneficial if it did since having vetted, third party standards for explosive qualification testing would simplify the process for regulatory approval. Copyright © 2013 by ASME.