Publications

Evaluating convergence of reduced order models using nonlinear normal modes

Brake, Matthew R.; Brake, Matthew R.; Allen, Mathew S.

It is often prohibitively expensive to integrate the response of a high order nonlinear system, such as a finite element model of a nonlinear structure, so a set of linear eigenvectors is often used as a basis in order to create a reduced order model (ROM). By augmenting the linear basis with a small set of discontinuous basis functions, ROMs of systems with local nonlinearities have been shown to compare well with the corresponding full order models.When evaluating the quality of a ROM, it is common to compare the time response of the model to that of the full order system, but the time response is a complicated function that depends on a predetermined set of initial conditions or external force. This is difficult to use as a metric to measure convergence of a ROM, particularly for systems with strong, non-smooth nonlinearities, for two reasons: (1) the accuracy of the response depends directly on the amplitude of the load/initial conditions, and (2) small differences between two signals can become large over time. Here, a validation metric is proposed that is based solely on the ROM’s equations of motion. The nonlinear normalmodes (NNMs) of the ROMs are computed and tracked as modes are added to the basis set. The NNMs are expected to converge to the true NNMs of the full order system with a sufficient set of basis vectors. This comparison captures the effect of the nonlinearity through a range of amplitudes of the system, and is akin to comparing natural frequencies and mode shapes for a linear structure. In this research, the convergencemetric is evaluated on a simply supported beam with a contacting nonlinearity modeled as a unilateral piecewise-linear function. Various time responses are compared to show that the NNMs provide a good measure of the accuracy of the ROM. The results suggest the feasibility of using NNMs as a convergencemetric for reduced order modeling of systems with various types of nonlinearities.