Publications

Dynamic High-Temperature Tensile Characterization of an Iridium Alloy with Kolsky Tension Bar Techniques

Song, Bo S.; Nelson, Kevin N.; Lipinski, Ronald J.; Bignell, John B.; Ulrich, G.B.; George, E.P.

Conventional Kolsky tension bar techniques were modified to characterize an iridium alloy in tension at elevated strain rates and temperatures. The specimen was heated to elevated temperatures with an induction coil heater before dynamic loading; whereas, a cooling system was applied to keep the bars at room temperature during heating. A preload system was developed to generate a small pretension load in the bar system during heating in order to compensate for the effect of thermal expansion generated in the high-temperature tensile specimen. A laser system was applied to directly measure the displacements at both ends of the tensile specimen in order to calculate the strain in the specimen. A pair of high-sensitivity semiconductor strain gages was used to measure the weak transmitted force due to the low flow stress in the thin specimen at elevated temperatures. The dynamic high-temperature tensile stress–strain curves of a DOP-26 iridium alloy were experimentally obtained at two different strain rates (~1000 and 3000 s−1) and temperatures (~750 and 1030 °C). The effects of strain rate and temperature on the tensile stress–strain response of the iridium alloy were determined. The iridium alloy exhibited high ductility in stress–strain response that strongly depended on strain-rate and temperature.