Publications

Development of an aerial imaging system for heliostat canting assessments

Yellowhair, Julius; Apostolopoulos, Pavlos A.; Small, Daniel E.; Novick, David K.; Mann, Micah

The heliostat collector field is the front-end of large solar power tower plants. Any negative performance impacts on the collector field will propagate down the stream of subsystems, which can negatively impact energy production and financial revenues. An underperforming collector field will provide insufficient solar flux to the receiver resulting in the receiver running at below capacity and not producing the thermal energy required for thermal storage and to run the power block at optimum efficiency. It is prudent to have an optimally operating collector field especially for future Gen3+ plants. The performance of a deployed collector field can be impacted by mirror quality (surface and shape), mirror canting errors, tracking errors, and soiling. Any of these error sources can exist during installation and further degrade over time and, if left unattended, can drastically reduce the overall performance of the plant. Concentrating solar power (CSP) plant operators require information about the collector field performance to quickly respond with corrections, if needed, and maintain optimum plant performance. This type of fast response is especially critical for future Gen3+ plants, which require high collector field performance consistently. However, power tower operators have struggled with finding or developing the right tools to assess and subsequently fix canting errors on in-field heliostats efficiently and accurately. Sandia National Laboratories National Solar Thermal Test Facility (NSTTF) is developing an aerial imaging system to evaluate facet canting quality on in-situ and offline heliostats. The imaging system is mounted on an unmanned aerial system (UAS) to collect images of targets structures in reflection. Image processing on the collected images is then performed to get estimates of the heliostat canting errors. The initial work is to develop the system definition that achieves the required measurement sensitivities, which is on the order of 0.25-0.5 mrad for canting errors. The goal of the system is to measure heliostat canting errors to <0.5 mrad accuracy and provide data on multiple heliostats within a day. In this paper, the development of the system, a sensitivity analysis, and initial measurement results on two NSTTF heliostats are provided.