Publications
Crosstalk nuisance trip testing of photovoltaic DC arc-fault detectors
To improve fire safety in PV systems, Article 690.11 of the 2011 National Electrical Code (NEC) requires photovoltaic (PV) systems above 80 V on or penetrating a building to include a listed arc-fault protection device. Many arc-fault circuit interrupter (AFCI) devices are currently being listed and entering the market. Depending on the manufacturer, AFCIs are being deployed at the module-level, string-level, or array-level. Each arc-fault protection scheme has a different cost and arc-fault isolation capability. Module-level and string-level AFCI devices tout the ability to isolate the fault, identify the failed PV component, and minimize the power loss by selectively de-energizing a portion of the array. However, these benefits are negated if the arcing noisetypically used for arc-fault detectionpropagates to parallel, unfaulted strings and cause additional AFCI devices on the PV array to trip. If the arcing signature crosstalks from the string with the arc-fault via conduction or RF electromagnetic coupling, the location of the arc-fault cannot be easily determined and safe PV generators will be disconnected. Sandia National Laboratories collaborated with Texas Instruments to perform a series of nuisance trip scenarios with different PV configurations. Experimental results on a 2-string array showed arc detection on the faulted string occurred an average of 19.5 ms before unfaulted stringbut in some cases the AFCI on both strings would trip. © 2012 IEEE.