Publications
Aero-Optical Distortions of Turbulent Boundary Layers: DNS up to Mach 8
The character of aero-optical distortions produced by turbulence is investigated for subsonic, supersonic, and hypersonic boundary layers. Data from four Direct Numerical Simulations (DNS) of boundary layers with nominal Mach numbers ranging from 0.5 to 8 are used. The DNS data for the subsonic and supersonic boundary layers are of flow over flat plates. Two hypersonic boundary layers are both from flows with a Mach 8 inlet condition, one of which is flow over a flat plate while the other is a boundary layer on a sharp cone. Density fields from these datasets are converted to index-of-refraction fields which are integrated along an expected beam path to determine the effective Optical Path Lengths that a beam would experience while passing through the refractions of the turbulent field. By then accounting for the mean path length and tip/tilt issues related to bulk boundary layer effects, the distribution of Optical Path Differences (OPD s) is determined. Comparisons of the root-mean-squares of the OPDs are made to an existing model. The OPDr m s values determined from the subsonic and supersonic data were found to match the existing model well. As could be expected, the hypersonic data does not match as well due to assumptions like the Strong Reynold Analogy that were made in the derivation of the model. Until now, the model has never been compared to flows with Mach numbers as high as included herein or to flow over a sharp cone geometry.