Measured with an ARES rheometer in parallel plate mode while curing isothermally at 23C.
DOWNLOAD DATA FILES
23C
EN11: Viscosity Increase During Cure
- Thermosets
- 828/DEA
- 828/DEA: Shear Modulus vs Temp
- 828/DEA: Master Curve
- 828/DEA: Linear CTE vs Temp
- 828/DEA: Bulk Modulus vs Temp
- 828/DEA: Heat Capacity vs Temp
- 828/DEA: Compressive Yield
- 828/DEA: Tensile Yield
- 828/DEA: Tensile Creep for Fast Cooling Rate
- 828/DEA: Tensile Creep for Slow Cooling Rate
- 828/DEA: Cohesive Failure
- 828/DEA: Adhesive Failure
- 828/DEA: Pre-Reaction Kinetics
- 828/DEA: Gelation Reaction Kinetics
- 828/DEA: Viscosity Increase During Cure
- 828/DEA: Cure Shrinkage
- 828/DEA: Tg During Cure
- 828/DEA: Cohesive Strength During Cure
- 828/DEA/GMB
- 826/CTBN/DEA
- 828/CTBN/DEA/GMB
- 828/DEA/Silica
- 828/Z
- 828/Z/Alox
- 828/Z/Mica
- ANH2
- 459
- 459/GMB
- 459/Alox
- 828/D230
- 828/D230: Shear Modulus vs Temp
- 828/D230: Master Curve
- 828/D230: Linear CTE vs Temp
- 828/D230: Yield
- 828/D230: Tensile Creep at 23C
- 828/D230: Gelation Reaction Kinetics
- 828/D230: Viscosity Increase During Cure
- 828/D230: Shear Modulus During Cure
- 828/D230: Tg During Cure
- 828/D230: Cure Shrinkage
- Curative: Weight Loss
- 828/D230/GMB
- 828/D230/Alox
- 828/T403
- 828/2049
- 828/DEA
- Elastomers
- Sylgard 184
- Sylgard 184: Shear Modulus vs Temp
- Sylgard with Silica: Linear CTE vs. vol% Filler
- Sylgard 184: Young’s Modulus at 23C
- Sylgard 184: Bulk Modulus at 22C
- Sylgard 184: Adhesion Tests at 23C
- Sylgard 184: Gelation Reaction Kinetics
- Sylgard 184: Kinetics with 5% 3-6559 Accelerator
- Sylgard 184: Viscosity with 5% 3-6559 Accelerator
- Sylgard 184: Viscosity Increase During Cure
- Sylgard 184: Viscosity with 5% 3-6559 Accelerator
- Sylgard 184 / A16 GMB
- Sylgard 184 with Silica
- CS3100 Polysulfide
- CS3100 Polysulfide with Phenolic Microballoons
- Arathane 5750 (previously Uralane)
- Arathane 5753 (previously Uralane)
- EN11
- Sylgard 184
- Misc
- Foams